Pinpoint Test H: The Odometer Is Inoperative

H1 CHECK FOR CORRUPTED NVM
- Ignition ON.
- Observe the message center display area.
- Does the odometer display ERROR?
- Yes : INSTALL a new IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC) . TEST the system for normal operation.
- No : GO to H2.
H2 RETRIEVE THE RECORDED DTCs FROM THE PCM AND TCM KOEO SELF-TEST
- Check for recorded PCM and TCM DTCs from the Key ON Engine OFF (KOEO) self-test.
- Are any DTCs recorded?
- Yes : DIAGNOSE all PCM and TCM DTCs first. REFER to INTRODUCTION - GASOLINE MODELS and INTRODUCTION -- HYBRID .
- No : GO to H3.
H3 RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST
- Check for recorded DTCs from the IPC self-test.
- Are any DTCs recorded?
- Yes : For DTC U0100:00 (non-hybrid), Go To PINPOINT TEST BF .
  For DTC U0101:00 (hybrid), Go To PINPOINT TEST BG .
  
  For DTC U0401:68 (non-hybrid) or U0402:68 (hybrid), RETRIEVE and REPAIR all non-network DTCs in the PCM and other modules on the network. REFER to INTRODUCTION - GASOLINE MODELS and INTRODUCTION -- HYBRID and MULTIFUNCTION ELECTRONIC MODULES for a list of all DTCs.
  
  For all other DTCs, REFER to DTC TABLES .
- No : INSTALL a new IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC) . TEST the system for normal operation.