LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 925 (Instrument Cluster System) >> Diagnostic Tests >> Instrument Cluster (IC) >> Pinpoint Tests >> Pinpoint Test Q: The Speed Control Indicator Is Never/Always On >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

The instrument cluster receives the speed control status from the smart junction box (SJB) over the high speed controller area network (CAN) communication bus. When the speed control has been engaged, the SJB sends a message to the instrument cluster to illuminate the speed control indicator.

DTC U0294 - sets if the speed control message is missing for more than 5 seconds and the instrument cluster turns off speed control indicator.

Possible Causes