LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 909 (Exterior Lighting System) >> Diagnostic Tests >> Turn Signal and Hazard Lamps >> Pinpoint Tests >> Pinpoint Test J: One Turn Signal/Hazard Lamp Is Inoperative/Always On >> Normal Operation - STX

Normal Operation - STX

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

The SJB provides voltage to the indicator flasher relay through circuit CBP20 (YE/VT). The indicator flasher relay routes the voltage to the multifunction switch through circuit CLS42 (VT/BN). When the multifunction switch is placed in the LH TURN position, the multifunction switch routes the voltage to the LH front and rear turn lamps through circuits CLS41 (GY/YE). When the multifunction switch is placed in the RH TURN position, the multifunction switch routes the voltage to the RH front and rear turn lamps through circuits CLS39 (VT/WH). Ground for the indicator flasher relay is provided through circuit GD161 (BK/YE).

Possible Causes

scientia non olet · About LEMON Manuals