Normal Operation - STX
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
When the brake pedal is applied, the voltage is routed to the high mounted stoplamp and the rear lamps through circuit CCB08 (VT/WH).
Possible Causes
- Circuit CBB38 (GY/BU) short to voltage
- Circuit CBB42 (GN) short to voltage
- Circuit CCB08 (VT/WH) short to voltage
- Circuit CLS35 (VT) short to voltage
- Circuit CLS36 (YE) short to voltage
- Stoplamp switch
- Multifunction switch