LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 909 (Exterior Lighting System) >> Diagnostic Tests >> Stoplamp >> Pinpoint Tests >> Pinpoint Test H: The Stoplamp Are On Continuously >> Normal Operation - Except STX

Normal Operation - Except STX

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

When the brake pedal is applied, the voltage is routed to the high mounted stoplamp and the multifunction switch through circuit CCB08 (VT/WH). The multifunction switch then routes the voltage to the LH and RH rear lamps through circuits CLS35 (VT) and CLS36 (YE), respectively.