LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 909 (Exterior Lighting System) >> Diagnostic Tests >> Headlamps >> Pinpoint Tests >> Pinpoint Test C: The High Beams Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

When the multifunction switch is placed in the HIGH BEAM position with the headlamps on, the multifunction switch routes voltage to the smart junction box (SJB) through circuit CLF27 (GN/BN). The SJB then routes voltage to the high beams through circuit CBP14 (VT/OG).

Possible Causes

scientia non olet · About LEMON Manuals