Tire Pressure Monitoring System (TPMS) Pressure Sensor Strap

The sensor strap keeps the sensor and the cradle retained to the wheel. A factory-installed strap is joined together with a one-time-use buckle and a dealer-installed strap is joined together with a worm gear (similar to a radiator hose clamp). Both straps should be discarded after removal and should not be re-used.

The sensor can be serviced separately from the strap and cradle. The sensor is available separately from the cradle and the strap. The cradle and strap are available as a strap kit. There are several different strap kits available based on wheel diameter, all strap kits share the same base part number.