Backlash not within specification
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- To increase or decrease backlash, remove the bearing caps and install a thicker shim and a thinner shim accordingly.
- If backlash is not within the specification, increase the thickness of one differential bearing shim and decrease the thickness of the other differential bearing shim by the same amount.
- Rotate the differential assembly several times to verify that the differential bearings seated correctly.
- Using the special tools, recheck the backlash.
- If backlash is within the specification, refer to Backlash within specification in this procedure. If backlash is not within the specification, repeat Backlash not within specification in this procedure.