LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 825 (Safety Belt System - F250-F550) >> Removal And Installation >> Child Safety Seat Tether Anchor >> Removal And Installation >> Regular and Crew Cab vehicles

Regular and Crew Cab vehicles

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: RH side shown, all others similar.
    Fig 1: Locating Child Safety Seat Tether Anchor Bolt
    GF0005422Courtesy of FORD MOTOR CO.
  1. Remove the bolt and the child safety seat tether anchor.
    • To install, tighten to 30 Nm (22 lb-ft).