LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 798 (Climate Control - F250-F550) >> Removal And Installation >> Blower Motor >> Removal And Installation >> Vehicles with 5.4L and 6.8L

Vehicles with 5.4L and 6.8L

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the speed control servo connector.
    Fig 1: Disconnecting Speed Control Servo Connector
    GF0008034Courtesy of FORD MOTOR CO.
  2. Remove the bolts and remove the speed control servo.
    • To install, tighten to 11 Nm (8 lb-ft).
    Fig 2: Locating Speed Control Servo Bolts
    GF0008035Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals