Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument cluster. For additional information, refer to Instrument Cluster (IC) in this article.
Remove the 7 screws and the instrument cluster shield.

Fig 1: Locating Screws And Instrument Cluster Shield

Courtesy of FORD MOTOR CO.

NOTE: One of the base instrument clusters shown, other instrument clusters are similar.

Remove the warning indicator bulb(s) in question.
- Rotate the bulb one quarter turn counterclockwise and lift it out from the instrument cluster.

Fig 2: Locating Warning Indicator Bulb

Courtesy of FORD MOTOR CO.

To install, reverse the removal procedure.