LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Climate Control - F-150 & Mark LT) >> Removal And Installation >> In-Vehicle Temperature Sensor >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Remove the 2 in-vehicle temperature sensor screws.
  3. Remove the temperature sensor finish panel.
  4. Remove the in-vehicle temperature sensor.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals