LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 726 (Seat System - F-150 & Mark LT) >> Disassembly And Assembly >> Seat Cushion - Front, 20 Percent >> Disassembly And Assembly

Disassembly And Assembly

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 20 percent seat cushion. For additional information, refer to Seat - Front, 20 Percent  in this article.
  2. Release the J-clips and remove the seat cushion pan.
    Fig 1: Locating J-Clips
    GF0001912Courtesy of FORD MOTOR CO.
  3. Remove the 6 hog rings (3 shown) and remove the 20 percent seat trim cover from the seat cushion foam pad.
    Fig 2: Locating Hog Rings
    GF0001913Courtesy of FORD MOTOR CO.
  4. To assemble, reverse the disassembly procedure.