Removal And Installation
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the wiper pivot arms. For additional information, refer to Wiper Pivot Arm in this article.
- Remove the cowl grille panel. For additional information, refer to FRONT END BODY PANELS article.
- Disconnect the windshield wiper motor electrical connector.
- Remove the 3 windshield wiper motor assembly bolts.
- To install, tighten to 8 N.m (71 lb-in).
- Remove the windshield wiper motor assembly.
- To install, reverse the removal procedure.