LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2190 (Exterior Trim & Ornamentation) >> Removal And Installation >> Radiator Grille >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper cover. For additional information, refer to BUMPERS .
  2. Remove the isolator-to-bumper cover bolts.
  3. Remove the isolator-to-radiator grille reinforcement screws.
  4. Remove the isolator.
    • Release the isolator from the clips on the bumper cover.
  5. Remove the radiator grille and radiator grille reinforcement.
    • Release the radiator grille reinforcement from the clips on the bumper cover.
  6. Remove the radiator grille-to-radiator grille reinforcement nuts and remove the radiator grille.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals