Normal Operation
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Pressing the left rear heated seat switch once in either the hi or low mode will command ON the left rear heated seat. Voltage is then supplied to the left rear heated seat switch from the heated seat module on either circuit CHS48 (YE) (hi heat mode) or circuit CHS49 (VT) (low heat mode) illuminating the switch indicator. Pressing the left rear heated seat switch again in the mode that is currently on will set the left rear heated seat to OFF and also turn that LED OFF.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Heated seat module