LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2137 (Accessory Drive System) >> Removal And Installation >> Accessory Drive Belt >> Installation

Accessory Drive Belt: Installation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Working from under the vehicle, position the accessory drive belt on all pulleys, with the exception of the generator pulley.
    2. NOTE: After installation, make sure the accessory drive belt is correctly seated on all pulleys.
  2. Working from the top of the vehicle, rotate the accessory drive belt tensioner clockwise and install the accessory drive belt.
  3. Install the RH inner fender splash shield. For additional information, refer to FRONT END BODY PANELS .
scientia non olet · About LEMON Manuals