Normal Operation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

This DTC may be encountered if a sensor designed for a different application is installed. Low pressure applications utilize a black- or blue-colored sensor, while heavy duty applications utilize a green-colored sensor. The Smart Junction Box (SJB) will only allow one type of sensor to be trained using the Tire Pressure Monitoring System (TPMS) sensor training procedure. Make sure the correct sensors are used to avoid compatibility issues.

DTC B106A (Pressure Sensor Range Bit Incorrect State) - When an attempt has been made to train a non-compatible sensor, the SJB will set DTC B106A.
This pinpoint test is intended to diagnose the following:
Incorrect tire pressure sensor(s) installed