LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2081 (Body Panel System - Front End Body Panels) >> Removal & Installation >> Radiator Grille Opening Panel Reinforcement >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 5 pin-type retainers and the radiator sight shield.
  2. Remove the pin-type retainer and the grille opening panel reinforcement cover.
  3. Remove the front bumper cover. For additional information, refer to REMOVAL AND INSTALLATION article.
  4. Remove the headlamps. For additional information, refer to REMOVAL AND INSTALLATION article.
  5. Remove the 6 radiator grille opening panel bolts.
    • To install, tighten to 6 Nm (53 lb-in).
  6. Remove the 4 radiator grille opening panel bracket bolts.
    • To install, tighten to 6 Nm (53 lb-in).
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals