Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If removing the header trim panel, remove the 2 A-pillar trim panels.

Remove the 2 sun visor screws and the sun visor.
Remove the A-pillar trim panel.
If necessary, remove the overhead console.
- Disconnect the electrical connector.
If necessary, remove the 2 screws and the 2 sun visor arm clips.
If necessary, remove the header trim panel.
To install, reverse the removal procedure.