Removal And Installation
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
4.0L and 4.6L vehicles
- Remove the front bumper cover. For additional information, refer to BUMPERS .
- Remove the 4 screws and the fog lamp.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to IDENTIFICATION CODES .
- Release the tabs and remove the fog lamp.
- Disconnect the electrical connector.
- To install, reverse the removal procedure.
5.4L vehicles
All vehicles