LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1283 (Accessory Drive) >> Removal And Installation >> Accessory Drive Belt Idler Pulley - 4.6L, 5.4L and 6.8L >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory drive belt. For additional information, refer to Accessory Drive Belt - 4.6L, 5.4L and 6.8L With A/C  or Accessory Drive Belt - 4.6L, 5.4L and 6.8L Without A/C .
  2. Remove the accessory drive belt idler pulley bolt and pulley.
    • To install, tighten to 25 Nm (18 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals