LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1237 (Manual Transmission External Controls) >> Removal And Installation >> Gearshift Lever Boot >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The gearshift lever boot and gearshift lever knob are one assembly.
  1. Separate the gearshift lever boot from the floor console finish panel.
  2. Rotate the gearshift lever knob counterclockwise. Remove the gearshift lever knob and gearshift lever boot assembly.
  3. To install, reverse the removal procedure.