LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1124 (Anti-Lock Brake System) >> Diagnostic Tests >> Anti-Lock Control >> Pinpoint Tests >> Pinpoint Test F: DTC C1279, C1280, C1281, C1282, C1516, C1517, C2769, C2770 - Stability Control Sensor Cluster Fault >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The accelerometer (lateral and longitudinal) and the yaw rate sensor are contained in the stability control sensor cluster. The sensor cluster measures the vehicle acceleration and yaw rate, then sends the signal along a dedicated high-speed controller area network (DHS-CAN) bus to the ABS module, circuits VCA23 (BU/WH) and VCA24 (GN/OG). Fused battery voltage is supplied to smart junction box (SJB) fuse 35 (10A) from battery junction box (BJB) fuse 53 (30A) along circuit CBB53 (GY/BN). This voltage is sent from SJB fuse 35 (10A) to the sensor cluster along circuit CBP35 (YE/GY). Ground is provided through circuit GD151 (BK/GN).

Possible Causes