LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKX FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Exterior Lighting System) >> Diagnostic Tests >> Headlamps >> Pinpoint Tests >> Pinpoint Test C: One High Beam Headlamp Is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

When the smart junction box (SJB) detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the HIGH BEAM position, the SJB energizes an internal relay. When the relay is energized, the relay routes voltage through circuit CLF08 (YE/VT) to the high beams. Ground is supplied on circuit GD123 (BK/GY) for the RH headlamp. Ground for the LH headlamp is routed through a joint connector through circuit GD120 (BK/GN).

This pinpoint test is intended to diagnose the following: