LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKS FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel & Console >> Removal And Installation >> Instrument Panel Finish Panel >> Removal and Installation

Removal and Installation

  1. Remove the RH instrument panel finish moulding.
    • Pull the RH instrument panel finish moulding rearward to release the retaining clips.
  2. Remove the 4 instrument panel finish panel screws.
    Fig 1: Locating Instrument Panel Finish Panel Screws
    G06077482Courtesy of FORD MOTOR CO.
  3. Remove the instrument panel finish panel.
    • Pull the instrument panel finish panel rearward to release retaining clips.
  4. To install, reverse the removal procedure.
    • To install, make sure to align the trim panel retaining clips to the retaining clip holes in the instrument panel.
scientia non olet · About LEMON Manuals