LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKS FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel & Console >> Removal And Installation >> Instrument Panel Finish Panel Applique >> Removal and Installation

Removal and Installation

  1. Remove the LH or RH instrument panel finish panel moulding.
    • Pull the instrument panel finish panel moulding toward the rear of the vehicle to release the retaining clips.
  2. Remove the instrument panel finish panel applique nuts.
  3. Remove the instrument panel finish panel applique.
  4. To install, reverse the removal procedure.
    • Make sure to align the instrument panel finish panel moulding retaining clips to the retaining clip holes in the instrument panel.
scientia non olet · About LEMON Manuals