LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKS FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, & Warning Chimes >> Removal And Installation >> Instrument Panel Cluster (IPC) >> Removal

Instrument Panel Cluster (IPC): Removal

NOTE: It is critical that the correct Instrument Panel Cluster (IPC) be installed when installing a new IPC  . The IPC  differs between Passive Anti-Theft System (PATS) vehicles equipped with Intelligent Access (IA) and vehicles not equipped with IA  . If the incorrect IPC  is installed, the vehicle may exhibit a PATS  no-start condition.
  1. If installing a new IPC  , upload the module configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION .
  2. Remove the IPC  finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  3. Lower the tilt steering column to the lowest setting.
  4. Remove the 2 screws and the IPC  .
    • Disconnect the electrical connector.
scientia non olet · About LEMON Manuals