LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKS FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, & Warning Chimes >> Removal And Installation >> Instrument Panel Cluster (IPC) >> Installation

Instrument Panel Cluster (IPC): Installation

  1. Position the IPC  in the instrument panel, connect the electrical connector and install the 2 screws.
  2. Install the IPC  finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  3. If installing a new IPC  , download the IPC  configuration information from the scan tool into the new IPC  . For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
  4. NOTE: If installing a new IPC  on vehicles that are not equipped with IA  , the IPC  and the PCM require a parameter reset to allow the IPC  and the PCM to recognize each other. Failure to carry out the parameter reset to the IPC  and the PCM may result in a no start condition.

    If installing a new IPC  on vehicles that are not equipped with IA  , carry out the parameter reset procedure. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .

  5. NOTE: If equipped, the vehicles Integrated Keyhead Transmitter (IKT) keys must be programmed to the new IPC  .

    If installing a new IPC  , carry out the PATS  key programming. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .

scientia non olet · About LEMON Manuals