Instrument Cluster (IC) Configuration
The instrument cluster (IC) contains items that are configurable. While some configurable items are customer preference items, most items are configured at the end of the line production and only available for configuration through the programmable module installation (PMI). Refer to MODULE CONFIGURATION article.
NOTE:
When installing a new instrument cluster (IC), it is necessary to upload the module configuration to the scan tool. Following installation of the instrument cluster (IC), download the module configuration from the scan tool into the new instrument cluster (IC). Refer to MODULE CONFIGURATION
article to carry out programmable module installation (PMI). It is also necessary to carry out a parameter reset procedure whenever a new instrument cluster (IC) or PCM is installed. Refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS)
article.
The configurable instrument cluster (IC) customer preference items are as follows:
- Overspeed warning (gulf coast country [GCC] only)
- Reverse warning chime
- Outside air units
- Gallon display type
- Metric display type
- Language
- Oil life warning threshold
- Autolocks
- Easy entry/exit
- Belt timer (Belt-Minder®)