LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2006 >> LS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation >> Removal And Installation >> Brake Pedal Motor Cable >> Removal and Installation

Removal and Installation

  1. Remove the steering column. For additional information, refer to STEERING COLUMN .
  2. Disconnect the drive cable assemblies from the brake pedal transmission.
  3. Release the cable assembly from the adjustable pedal motor.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals