LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2005 >> Navigator 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center >> General Procedures >> Compass Zone Adjustment - Without Message Center

Compass Zone Adjustment - Without Message Center

    NOTE: The compass zone setting is preset from the factory to Zone 8.
    Fig 1: Compass Calibration Zone Map
    G03965509Courtesy of FORD MOTOR CO.
  1. Determine which magnetic zone you are in for your geographic location.
  2. Start the engine.
  3. Press the TRIP/RESET button, hold for 6 seconds and release. ZONE will appear in the instrument cluster display.
  4. Press and release the TRIP/RESET button until the desired zone number appears.
  5. When the desired zone number appears in the instrument cluster display, hold the TRIP/RESET button down to set the new zone number. The instrument cluster display will return to the normal mode when the TRIP/RESET button has not been pressed for 6 seconds.
scientia non olet · About LEMON Manuals