Forward Clutch Assembly: Disassembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Soak all friction clutch plates in clean automatic transmission fluid.

Remove and discard the 2 seals and remove the No. 7 thrust washer.

Fig 1: Identifying Seals And Thrust Washer

Courtesy of FORD MOTOR CO.

Remove the No. 8 forward clutch thrust bearing.

Fig 2: Identifying Forward Clutch Thrust Bearing

Courtesy of FORD MOTOR CO.

Remove the snap ring and the forward clutch plates.

Fig 3: Locating Snap Ring And Forward Clutch Plates

Courtesy of FORD MOTOR CO.

Using the special tools, remove the snap ring.

Fig 4: Identifying Snap Ring With Special Tools

Courtesy of FORD MOTOR CO.

NOTE: Note the orientation of the return spring.

Remove the forward clutch balance piston and the return spring. Discard the forward clutch balance piston.

Fig 5: Locating Forward Clutch Balance Piston Return Spring

Courtesy of FORD MOTOR CO.

Remove and discard the forward clutch piston.

Fig 6: Locating Forward Clutch Piston

Courtesy of FORD MOTOR CO.

Clean and inspect all components for damage.