LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2002 >> Navigator RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1784 (Automatic Transmission - 5R110W -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Center Support >> Assembly

Center Support: Assembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Follow the disassembly procedure in reverse order.
    • Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
    • Install new seals.
  2. After the center support is completely assembled, apply air to the port and verify the function of the piston.
    3. Fig 1: Applying Air To Port And Verify Function Of Piston
    GF0006933Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals