Brake Booster: Removal

Remove the wiper arm nuts and remove wiper arms.

Fig 1: Removing Wiper Arm Nuts
Courtesy of FORD MOTOR CO.
Disconnect the washer hose.

Fig 2: Disconnecting Washer Hose
Courtesy of FORD MOTOR CO.
Remove the cowl cover.
1. Remove the cowl cover pushpins.
2. Remove the cowl cover rubber trim.
3. Remove the cowl cover.
Fig 3: Removing Cowl Cover
Courtesy of FORD MOTOR CO.
Remove the vacuum hose bracket nut and position bracket aside.

Fig 4: Removing Vacuum Hose Bracket Nut
Courtesy of FORD MOTOR CO.
Remove the cowl brace center bolts.

Fig 5: Removing Cowl Brace Center Bolts
Courtesy of FORD MOTOR CO.
Remove the cowl brace end bolts and remove the bracket.

Fig 6: Removing Cowl Brace End Bolts
Courtesy of FORD MOTOR CO.
Disconnect the coolant reservoir return hose.

Fig 7: Disconnecting Coolant Reservoir Return Hose
Courtesy of FORD MOTOR CO.
Remove the brake master cylinder. For additional information, see MASTER CYLINDER .
Disconnect the power brake booster check valve.

Fig 8: Disconnecting Power Brake Booster Check Valve
Courtesy of FORD MOTOR CO.
Disconnect the power brake booster electrical connector (as applicable).

Fig 9: Disconnecting Power Brake Booster Electrical Connector
Courtesy of FORD MOTOR CO.
Remove the coolant reservoir bolts.

Fig 10: Removing Coolant Reservoir Bolts
Courtesy of FORD MOTOR CO.
Disconnect the radiator to engine vent.

Fig 11: Disconnecting Radiator-To-Engine Vent
Courtesy of FORD MOTOR CO.
Remove the coolant reservoir.

Fig 12: Removing Coolant Reservoir
Courtesy of FORD MOTOR CO.
Remove the clip from the brake pedal pin.

Fig 13: Removing Brake Pedal Pin Clip
Courtesy of FORD MOTOR CO.
Remove the brake pedal pin.

Fig 14: Removing Brake Pedal Pin
Courtesy of FORD MOTOR CO.
Remove the booster nuts.

Fig 15: Removing Power Brake Booster Nuts
Courtesy of FORD MOTOR CO.
Remove the power brake booster.

Fig 16: Removing Power Brake Booster
Courtesy of FORD MOTOR CO.