Removal and Installation
- Apply the parking brake.
- If equipped with a manual transmission, place the selector lever in fourth gear.
- If equipped with an automatic transmission, place the selector lever in neutral.
- Disconnect the battery ground cable.
- Remove the ashtray finish panel.
- Disconnect the electrical connectors.
Courtesy of FORD MOTOR CO.
- If equipped with a manual transmission, remove the gearshift lever knob.
- If equipped, disconnect the cellular phone electrical connectors.
- Remove the console finish panel assembly by pulling upward from the front first.
- If equipped, disconnect the traction control switch electrical connector.
- If equipped, release the cellular phone wiring harness from the console finish panel assembly.
Courtesy of FORD MOTOR CO.
- To install, reverse the removal procedure.