Lower Control Arm & Ball Joint: Installation

To install, reverse removal procedure. Install torsion bar adjuster. Turn torsion bar adjuster until reference marks align. Install Torsion Bar Installer/Remover (T95T-5310-AR) and Adapter (T96T-5310-A) onto torsion bar. See Figure. Tighten remover/installer to load torsion bar. Coat adjusting bolt with a dry adhesive whenever it is backed off or removed. Install torsion bar adjuster nut and bolt. To complete installation, tighten fasteners to specification. See TORQUE SPECIFICATIONS . Check ride height.