Differential Ring And Pinion: Notes
WARNING: This page is about a different car, the 2007 Ford Pickup and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| 2-Jaw Puller | 205-D072 (D97L-4221-A) or equivalent | |
| Depth Gauge/Aligner, Drive Pinion | 205-226 (T85T-4020-AH1) | |
| Remover/Installer, Bearing Cup | 205-D049 (D81T-4616-A) or equivalent | |
| Plate, Bearing/Oil Seal | 205-090 (T75L-1165-B) | |
| Installer, Drive Pinion Flange | 205-233 (T85T-4851-AH) | |
| Adapter for 205-S156 | 205-159 (T80T-4020-F42) | |
| Depth Gauge, Drive Pinion (10 1/2-inch) | 205-423 | |
| Gauge Tube | 205-D038 (D81T-4020-F51) | |
| Adapter for 205-S127 | 205-111 (T76P-4020-A11) | |
| Handle (Long) | 205-D055 (D81L-4000-A) or equivalent | |
| Installer, Drive Pinion Bearing | 205-232 (T85T-4621-AH) | |
| Installer, Drive Pinion Bearing | 205-231 (T85T-4616-AH) | |
| Installer, Drive Pinion Oil Seal | 205-208 (T83T-4676-A) | |
| Protector, Drive Pinion Thread | 205-229 (T85T-4209-AH) | |
| Drawbar, Rear Axle | 205-098 (T75T-1176-A) | |
| Adapter for 205-S156 | 205-160 (T80T-4020-F43) | |
| Installer, Differential Carrier Bearing | 205-D044 (D81T-4221-A) or equivalent | |
| Dial Indicator Gauge with Holding Fixture | 100-002 (TOOL-4201-C) or equivalent | |
| Installer, Differential Shim | 205-228 (T85T-4067-AH) | |
| Collets, Differential Carrier Bearing | 205-430 (Part of 205-S419) | |
| Retaining Ring, Differential Carrier Bearing | 205-431 (Part of 205-S419) | |
| Step Plate, Differential Carrier Bearing | 205-432 (Part of 205-S419) | |
| Gauge, Clutch Housing | 308-021 (T75L-4201-A) | |
| Holding Fixture, Drive Pinion Flange | 205-126 (T78P-4851-A) | |
| Removal Screw, Bearing Tube | 308-092 (T84T-7025-B) | |
| Remover, Tube | 308-052 (T77J-7025-B) |
Material
| Item | Specification |
|---|---|
| Motorcraft SAE 75W-140 High Performance Rear Axle Lubricant XY-75W140-QL (vehicles with the trailer towing option or 4:10 ratio) |
WSL-M2C192-A |
| Stud and Bearing Mount TA-27 or equivalent |
WSK-M2G349-A1 |
| Clear Silicone Rubber TA-32 |
ESB-M4G92-A |