LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1997 >> Continental >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic Air >> Testing & Diagnosis >> Equipment Hook-Up

Equipment Hook-Up

  1. Ensure vehicle ignition switch is in OFF position. Select correct New Generation Star (NGS) program card. Insert program card into NGS tester. Note direction card is inserted into tester, tester will not work if incorrectly inserted.
  2. Connect OBD-II adapter cable to NGS tester. Plug adapter into vehicle Data Link Connector (DLC), located under instrument panel near steering column. Plug NGS tester power cable into cigarette lighter socket.
  3. NGS tester will now automatically perform an initialization test, which checks if program card and vehicle interface module are compatible. If an error message now appears on NGS display, See appendix "C" of NGS tester operator manual.
  4. Enter vehicle model year, engine size, model, etc. into NGS tester. Turn vehicle ignition switch to RUN position.
scientia non olet · About LEMON Manuals