LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1997 >> Continental >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic Air >> Removal & Installation (Rear Suspension - Mechanical) >> Stabilizer Bar (Rear) >> Installation

Stabilizer Bar (Rear): Installation

  1. To install, reverse removal procedure. Install insulators on stabilizer bar with opening facing rear of vehicle. Ensure stabilizer bar link and bushings are installed correctly.
  2. Stabilizer bar link and bushing is color coded, Green (right side) and Red (left side). Tighten fasteners to specification. See TORQUE SPECIFICATIONS  . Lower vehicle, and turn air suspension on.
scientia non olet · About LEMON Manuals