LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1997 >> Continental >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic Air >> Removal & Installation (Air System & Electrical) >> Vehicle Control Module >> Removal

Vehicle Control Module: Removal

  1. Turn ignition OFF. Turn air suspension switch, located in left side of trunk, to OFF position. See Figure or Figure .
  2. Vehicle Control Module (VDM) is located in trunk, behind package tray. See Figure or Figure . Remove upper luggage compartment trim panel and lower module tray. Disconnect VDM electrical connector.
  3. Unsnap VDM from tray clips and remove module. To install, reverse removal procedure.