LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1990 >> Mark VII LSC >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VINS [E,F] & 5.8L V8 - VIN [G] >> Removal & Installation >> Oil Pan >> Removal (Mark VII & Mustang)

Removal (Mark VII & Mustang)

  1. Disconnect negative battery cable. Remove fan shroud bolts and position shroud over fan. Remove oil level indicator from left-hand side of cylinder block. Remove air cleaner tube.
  2. Raise and support vehicle. Drain engine oil. Remove starter motor wires and starter. Remove catalytic converter and muffler inlet pipes. Remove engine mount-to-No. 2 crossmember bolts.
  3. Remove No. 3 crossmember and support assemblies. Remove steering gear attaching bolts and position steering gear forward out of work area. Raise and support engine for clearance of oil pan removal.
  4. On Mustang models, remove oil pan attaching bolts and lower oil pan. Remove oil pump and pick-up tube assembly to drop into oil pan. Remove oil pan. On Mark VII models, remove oil pan attaching bolts and lower oil pan.
scientia non olet · About LEMON Manuals