Engine Identification
NOTE:
For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION
article in the GENERAL INFORMATION section.
Engine may be identified from Vehicle Identification Number (VIN). VIN is stamped on a plate, on top of instrument panel and visible through windshield. VIN contains 17 characters. The 8th character identifies engine.
An engine code information label is located on front of engine. This label contains engine calibration number, engine build date, engine plant code and engine code.
An emission calibration number label is located on driver's door or door post pillar. This label identifies engine calibration number, engine code number and revision level.
All label numbers are necessary for determining correct and unique parts to specific engines. DO NOT remove labels at any time. Record these numbers for future reference.
ENGINE IDENTIFICATION CODES
| Application | VIN Code |
|---|---|
| 5.0L (302") V8 HO PFI | E |
| 5.0L (302") V8 PFI | F |
| 5.8L (351") V8 2-Bbl. | G |