LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1990 >> Mark VII LSC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster >> Removal & Installation (Mark VII LSC)

Removal & Installation (Mark VII LSC)

  1. Disconnect negative battery cable. Disconnect warning light module connectors and remove instrument cluster finish panel. Remove instrument panel molding.
  2. Remove 5 instrument cluster attaching screws. DO NOT remove 2 top screws fastening lens to mask. Remove lens and mask assembly. Pull cluster away from backplate. Some effort may be required to pull quick disconnect terminals from clips. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals