LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1990 >> Mark VII LSC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Hazard Flasher Switch >> Removal & Installation (Mustang)

Removal & Installation (Mustang)

  1. Disengage 2 locking tabs on right side of switch under actuating (on, off) paddles, by pushing locking tabs with small screwdriver and pulling on paddles.
  2. Using a small screwdriver, pry left side of switch out of instrument panel while preventing locking tabs from snapping into place. Pull switch completely out of opening and unplug connectors. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals