LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1990 >> Mark VII LSC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Instrument Cluster >> Display Segments Missing Or Extra Segments On

Display Segments Missing Or Extra Segments On

  1. Place ignition switch in ACC position. Locate 2-wire display test connector, attached to fuse block. Install jumper wire between test terminals.
  2. If display is unchanged, jumper wire is not making connection. Reposition jumper wire and re-test. If display reads 01 F7 000116, 01 F8 000116, 01 F7 000118 or 01 F8 000118, go to next step. If display reads anything else, replace EIM.
  3. Depress tripminder MILES km switch 9 times to advance all segments of display. All segments should be on. If okay, go to next step. If not, replace EIM.
  4. Depress tripminder MILES km switch one more time. All segments should go off. If okay, go to next step. If not, replace EIM.
  5. Depress tripminder MILES km switch 2 more times. Segments should light, one at a time, from left to right. If only one segment lights at a time, system is okay. If 2 or more segments light at same time, replace EIM.
scientia non olet · About LEMON Manuals