LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1990 >> Mark VII LSC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Removal & Installation >> Electronic Instrument Module (EIM)

Electronic Instrument Module (EIM)

  1. Remove instrument cluster. Remove screws retaining NVMM cable connector at back of EIM. Remove cable from under 2 retaining tabs.
  2. Remove EIM flex connector from 4 mounting tabs on backplate. Remove EIM by sliding it rearward. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals