LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1990 >> Continental Base >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Removal, Installation & Adjustments - Air >> Front Suspension Removal & Installation >> Stabilizer Bar >> Removal

Stabilizer Bar: Removal

  1. Turn off air suspension switch, located behind trim panel in left side of trunk. See Figure . Using a body hoist, raise vehicle. Support vehicle with jackstands behind subframe.
  2. Remove and discard nuts from attaching link between stabilizer bar and strut. Remove steering gear-to-subframe nuts. Separate steering gear from subframe. Support subframe with jackstands. Remove and discard 2 bolts from rear of subframe.
  3. Lower rear of subframe for access to stabilizer bar retaining brackets. Remove and discard stabilizer bar bracket retaining bolts. Remove stabilizer bar brackets, insulators and stabilizer bar. Discard insulators.