LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1990 >> Continental Base >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Removal, Installation & Adjustments - Air >> Front Suspension Removal & Installation >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

  1. To install, reverse removal procedure. Lubricate new insulators with Lubricant (E25Y-19553-A) before installing. DO NOT lubricate insulators with petroleum based lubricants.
  2. Install new bolts in stabilizer bar brackets, subframe and attaching link nuts. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS  table. Lower vehicle and turn on air suspension switch.
CAUTION: DO NOT turn air suspension switch on until vehicle is lowered and vehicle weight exists on all wheels.
scientia non olet · About LEMON Manuals