LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [F] & 5.0L Ho V8 - VIN [M] >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application (1) Ft. Lbs. (N.m)
Camshaft Sprocket Bolt 40-45 (54-61)
Camshaft Thrust Plate Bolt 9-12 (12-16)
Connecting Rod Nut 19-24 (26-32)
Crossmember-to-Frame Bolts 35-50 (47-68)
Cylinder Front Cover Bolt 12-18 (16-24)
Cylinder Head Bolt (2) 65-72 (88-97)
Damper-to-Crankshaft Bolt 70-90 (95-122)
Exhaust Manifold Retainer Bolt 18-24 (24-32)
Fan-to-Water Pump Hub Bolt 12-18 (16-24)
Flywheel Bolt 75-85 (102-115)
Flywheel-to-Crankshaft Bolts 75-85 (102-115)
Fuel Pump-to-Front Cover Bolt 19-27 (26-37)
Intake Manifold Retainer Bolt (3) 23-25 (31-34)
Main Bearing Cap Bolt 60-70 (81-95)
Motor Mount Through Bolts 35-50 (47-68)
Motor Mount-to-Crossmember Bolts 57-65 (77-88)
Motor Mount-to-Engine Bolts 35-60 (47-81)
Oil Pump
Mount Bolt 22-32 (30-43)
Inlet Tube-to-Pump Bolt 10-15 (14-20)
Inlet Tube-to-Bearing Cap Bolt 22-32 (30-43)
Pulley-to-Damper Bolt 35-50 (47-68)
Rear Mount-to-Trans. Bolts 50-70 (68-95)
Rocker Arm Fulcrum Bolt 18-25 (24-34)
Valve Cover Bolts 3-5 (4-7)
Water Pump Mount Bolt 12-18 (16-24)
INCH Lbs. (N.m) 
Oil Pan 106-133 (12-15)
(1) Always replace self-locking fasteners.
(2) Tighten in 2 steps: Step 1 - 55-65 ft. lbs. (75-88 N.m); Step 2 - 65-72 ft. lbs. (88-97 N.m).
(3) After assembly, retighten with engine at operating temperature.